Zanussi ZTE7100PZ Manuel D’Utilisation

Open the filter

Use a moist hand to

clean the filter.

If necessary clean the

filter with warm water

using a brush.

Close the filter.

Remove fluff from the

filter socket. For this

a vacuum cleaner can

be used.

Put the filter inside

the filter socket.

Disconnect the appliance before you

clean it.

Use a standard neutral soap detergent to clean

the inner surface of the drum and drum ribs. Dry

the cleaned surfaces with a soft cloth.

Do not use abrasive materials or

steel wool to clean the drum.

Use a standard neutral soap detergent to clean

the control panel and housing.
Use a moist cloth to clean. Dry the cleaned

surfaces with a soft cloth.

Do not use furniture cleaning agents

or cleaning agents which can cause

corrosion to clean the appliance.

You cannot activate the appliance.

Make sure that the mains plug is connected to the

mains socket.

 

Check fuse in fuse box (domestic installation).

The programme does not start.

Press Start/Pause.

 

Make sure that the appliance door is closed.

The appliance door does not close.

Make sure that the installation of the filter is cor-

rect.

 

Make sure that the laundry does not catch between

the appliance door and the rubber seal.

The display shows a long programme duration. 

Make sure that the weight of the laundry is applica-

ble to the duration of the programme.

 

Make sure that the filter is clean.

 

The laundry is too wet. Spin the laundry in the

washing machine again.

 

Make sure that the room temperature is not too

warm.

The display shows a short programme duration.

Set the Time Drying or the Extra Dry programme.