Zanussi ZTE7100PZ Manuel D’Utilisation

Page de 56
Problem
Possible solution
The display shows Err
2)
.
If you want to set a new programme, deactivate
and activate the appliance.
 
Make sure that the options are applicable to the
programme.
The display shows (e.g. E51)
2)
.
Deactivate and activate the appliance. Start a new
programme. If the problem occurs again, contact
the Service.
1) After maximum 5 hours, the programme ends automatically
2) only dryers with the display.
If the drying results are not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
• Incorrect setting of the conductivity sensor.
• The airflow slots are clogged.
Technical Data
Height x Width x Depth
850 x 600 x 600 mm (maximal 630 mm)
Max. depth with the appliance door open
1090 mm
Max. width with the appliance door open
950 mm
Adjustable height
850 mm (+ 15 mm - feet regulation)
Drum volume
108 l
Maximum load volume
7 kg
Voltage
230 V
Frequency
50 Hz
Necessary fuse
16 A
Total power
2600 W
Energy efficiency class
C
Energy consumption
1)
4,25 kWh
Annual energy consumption
2)
512 kWh
Left—on mode power absorption
0,70 W
Off mode power absorption
0,70 W
Type of use
Household
Permitted ambient temperature
+ 5°C to + 35°C
www.zanussi.com
25