Zanussi ZTE7100PZ Manuel D’Utilisation

A) Delicate button
B) Textile button: Cotton , Synthetic

C) Start/Pause button

To deactivate or activate the acoustic signals,

press and hold for approximately 2 seconds

touchpads (A) and (B) at the same time.

Before you use the appliance for the first time

do these operations:
• Clean the tumble dryer drum with a moist

cloth.

• Start a short programme (e.g. 30 minutes)

with moist laundry.

1. Prepare the laundry and load the appliance. 

Make sure that when you close

the door, the laundry does not

catch between the appliance

door and the rubber seal.

2. Set the correct programme and options for

the type of load.

3. Press the Start/Pause touchpad.

The programme starts.

1. Turn the Programme knob to   OFF

2. Set the programme.

When the programme is completed:
• An intermittent acoustic signal operates (If

the Buzzer function is on).

• The indicators   End/Anticrease and 

Filter comes on.

• The Start/Pause indicator is on.

The appliance continues to operate with the

crease guard phase for approximately other 30

minutes.
The crease guard phase removes creases from

your laundry.
You can remove the laundry before the crease

guard phase is completed. We recommend, for

better results, that you remove the laundry when

the phase is almost completed or completed.
When the crease guard phase is completed:
• Start/Pause indicator goes off.

1. Turn the Programme knob to   OFF

2. Open the appliance door.

3. Remove the laundry.

4. Close the appliance door.

Always clean the filter when a

programme is completed.

To decrease the energy consumption, this

function automatically deactivates the

appliance:
• After 5 minutes if you do not start the

programme.

• After 5 minutes from the end of the

programme.