Zanussi ZTE7100PZ Manuel D’Utilisation

These lights indicate the following functions:

• Drying  : This light indicates that the

appliance is in the drying phase.

• End/Anticrease  : This light is on at the

end of the cooling phase, during the

anticreasing phase and at the end of the

programme.

• Filter  : This light illuminates at the end of

the programme to remind you that the filters

must be cleaned.

• Close the zippers.

• Close the fasteners of the duvet covers.

• Do not keep ties or ribbons loose (e.g. apron

ribbons). Tie them before you start a

programme.

• Remove all items from the pockets.

• If an item has the internal layer made of

cotton, turn it inside out. Make sure that the

cotton layer is always external

• We recommend that you set the correct

programme applicable for the type of fabrics

that are in the appliance.

• Do not put fabrics with strong colours

together with fabrics with light colours.

Strong colours can bleed.

• Use an applicable programme for cotton

jersey and knitwear to prevent the items to

shrink.

• Make sure that the laundry weight is not

more than the maximum weight that is in the

programme table.

• Dry only the laundry that is applicable for

tumble dryer. Refer to the fabric label on the

items.

Laundry that is applicable for tumble dryer.

Laundry that is applicable for tumble dryer. Set the programme with standard tem-

perature.

Laundry that is applicable for tumble dryer. Set the programme with low tempera-

ture.

Laundry that is not applicable for tumble dryer.

At the end of each cycle the filter indicator is on

to tell you that the filter must be cleaned.

The filter collects the fluff. The fluff

occurs while the cloths are dried in

the tumble dryer.

Open the door.

Pull the filter.