Whirlpool 1187680 Manuel D’Utilisation

Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.

Check that all parts are included in parts package.

IMPORTANT: Observe all governing codes and ordinances.

Check the location where the air conditioner will be installed. 
Proper installation is your responsibility. Make sure you have 
everything necessary for correct installation.

The location should provide:

■

Grounded electrical outlet within 4 ft (122 cm) of where the 
power cord exits the air conditioner. 

NOTE: Do not use an extension cord.

■

Free movement of air in room to be cooled.

■

A large enough opening for the air conditioner and sleeve 
(sold separately). 

■

Adequate wall support for weight of air conditioner. 

The electrical ratings for your air conditioner are listed on the 
model and serial number label. The model and serial number 
label is located behind the front panel on the front flange above 
the coil area. 

To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:

Unplug air conditioner before servicing.

Use two or more people to move and install air conditioner.

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

■

Flat-blade and Phillips 
screwdrivers

■

Pliers

■

Level

■

Tape measure

■

Drill and 

¹⁄₈" or smaller bit

■

Utility knife

A

C

D

B