Agilent Technologies E6380-90073 Manuale Utente
![Agilent Technologies](https://files.manualsbrain.com/attachments/f20ae6efbee7636e6d0d1a481fd9e3847e3caeb5/common/fit/150/50/991587f279eee8cef3aa0a068e5c2f53d86b00e1bf17fbcbf9a87aa49d96/brand_logo.png)
100
Chapter 1
GPIB Command Dictionary
CANalyzer subsystem
:ACP:POWer:OFFSet <real number>
:ACP:POWer:OFFSet?
:ACP:POWer:OFFSet?
This command sets the frequency offset used when making adjacent
channel power measurements. The setting designates the frequency
offset from the center frequency at which the measurement is made.
Valid values are 100 kHz to 3 MHz.
channel power measurements. The setting designates the frequency
offset from the center frequency at which the measurement is made.
Valid values are 100 kHz to 3 MHz.
Syntax
CAN:ACP:POW:OFFS <real number>
CAN:ACP:POW:OFFS?
Example
CAN:ACP:POW:OFFS 100 kHz !sets the freq. offset to 100 kHz
CAM:ACP:POW:OFFS?
!returns freq. offset setting
Screen/field equivalent
CAN:ACP:POW:OFFS controls the
ACP Offset
field on the CDMA
ANALYZER screen.
:ARM
This command arms the measurements based on the type of
measurement (single or continuous), qualifying events, and triggering
events.
measurement (single or continuous), qualifying events, and triggering
events.
To put the CDMA analyzer in single triggering mode, use the
TRIG:MODE:RETR SING command.
TRIG:MODE:RETR SING command.
For continuous triggering, use TRIG:MODE:RETR REP.
Syntax
CAN:ARM
!arms the CDMA analyzer measurements
Example
TRIG:MODE:RETR SING
!sets the trigger mode to Single
CAN:ARM
!arms the measurement
Screen/field equivalent
CAN:ARM controls the
Arm Meas
subfield of the
Analyzer
field.