Agilent Technologies E6380-90073 Manuale Utente
Chapter 1
125
GPIB Command Dictionary
CDANalyzer subsystem
:MODE <string>
:MODE?
:MODE?
These commands set/query the measurement state of the code domain
analyzer.
analyzer.
CDAN:MODE can be overridden with the TRIG:MODE:RETR REP and
TRIG:MODE:RETR SING trigger commands. When the trigger
commands are used, the state of the field on the display is not updated.
(For instance, the screen may show
TRIG:MODE:RETR SING trigger commands. When the trigger
commands are used, the state of the field on the display is not updated.
(For instance, the screen may show
Single
selected when
TRIG:MODE:RETR REP is used.)
Syntax
CDAN:MODE ‘Single’
‘Cont’
CDAN:MODE?
Screen/field equivalent
CDAN:MODE controls the
Single/Cont
subfield of the
Measurement
field on the
Main
menu of the CODE DOM screen, when the CDMA
standard is set to “IS-95 Only”.
:PATH:GAIN <real number>
:PATH:GAIN?
:PATH:GAIN?
These commands set/query the gain into the code domain analyzer. This
command fine tunes the gain setting. This value is only selectable
through GPIB.
command fine tunes the gain setting. This value is only selectable
through GPIB.
See also, CAN:PATH:GAIN on page 106.
Syntax
CDAN:PATH:GAIN <real number> !values from 0 to 36 dB in 0.1
dB steps
CDAN:PATH:GAIN?
Screen/field equivalent
CDAN:PATH:GAIN has no equivalent field. This applies when the
CDMA standard is set to “IS-95 Only”.
CDMA standard is set to “IS-95 Only”.