Agilent Technologies E6380-90073 Manuale Utente
Chapter 1
229
GPIB Command Dictionary
MEASure subsystem
:CDANalyzer:MARKer:LEVel <meas cmnd>
:CDANalyzer:MARKer:LEVel?
:CDANalyzer:MARKer:LEVel?
IS-95 Only mode. These commands set/query the level at the marker on
the code domain analyzer’s trace during power or fast power
measurements (see :CDAN:MEAS on page 124). This measurement is
made relative to the value at Walsh Code 0.
the code domain analyzer’s trace during power or fast power
measurements (see :CDAN:MEAS on page 124). This measurement is
made relative to the value at Walsh Code 0.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
not use the :METer command.
Syntax
MEAS:CDAN:MARK:LEV <meas cmd>
MEAS:CDAN:MARK:LEV?
Example
MEAS:CDAN:MARK:LEV?
Screen/field equivalent
MEAS:CDAN:MARK:LEV? reads the
Lvl
field on the
Marker
menu of
the CODE DOM screen when a power or fast power measurement is
selected, and the
selected, and the
Ch pwr unit
field on the
CD Setup
menu is set to
Rel
.
This applies when the CDMA standard is set to “IS-95 Only”.