Agilent Technologies E6380-90073 Manuale Utente
![Agilent Technologies](https://files.manualsbrain.com/attachments/f20ae6efbee7636e6d0d1a481fd9e3847e3caeb5/common/fit/150/50/991587f279eee8cef3aa0a068e5c2f53d86b00e1bf17fbcbf9a87aa49d96/brand_logo.png)
Chapter 1
231
GPIB Command Dictionary
MEASure subsystem
:CDANalyzer:MARKer:TIME <meas cmnd>
:CDANalyzer:MARKer:TIME?
:CDANalyzer:MARKer:TIME?
IS-95 Only mode. These commands set/query the time at the marker on
the code domain analyze’s trace during a timing measurement (see
CDAN:MEAS on page 124). This measurement is made relative to the
value at Walsh Code 0.
the code domain analyze’s trace during a timing measurement (see
CDAN:MEAS on page 124). This measurement is made relative to the
value at Walsh Code 0.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
not use the :METer command.
Syntax
MEAS:CDAN:MARK:TIME <meas cmd>
MEAS:CDAN:MARK:TIME?
Example
MEAS:CDAN:MARK:TIME?
Screen/field equivalent
MEAS:CDAN:MARK:TIME? reads the
Time
field on the
Marker
menu
of the CODE DOM screen when a timing measurement is selected. This
applies when the CDMA standard is set to “IS-95 Only”.
applies when the CDMA standard is set to “IS-95 Only”.
:CDANalyzer:PNOFfset?
IS-95 Only mode. This command queries the PN offset measurement.
Syntax
MEAS:CDAN:PNOF?
Example
MEAS:CDAN:PNOF?
Screen/field equivalent
MEAS:CDAN:PNOF? queries the
PN Ofs
measurement field on the
CODE DOM screen whent he CDMA standard is set to “IS-95 Only”,
and the
and the
CD pwr unit
is set to
Abs
on the CD Setup image of the CODE
DOMAIN screen.