Agilent Technologies 22ET 8719ES Manuale Utente
4- 41
Printing, Plotting, and Saving Measurement Results
Saving Measurement Results
If you select
,
, or
, the data
is stored to disk in IEEE-64 bit real format (for LIF disks), and 32 bit PC format for
DOS disks. This makes the DOS data files half the size of the LIF files.
DOS disks. This makes the DOS data files half the size of the LIF files.
NOTE
Selecting
may also store data to disk in the S2P ASCII
data format. See
.
❏
If you select
, the user graphics area is saved. (Refer to the
programmer’s guide for information on using display graphics.) The measurement
display is not saved with this selection. (Refer to
display is not saved with this selection. (Refer to
❏
If
data array is saved along with any other selected array, the
instrument state is not saved, and therefore, cannot be recalled.
6. Choose the type of format you want:
❏ Choose
for all applications except CITIfile, S2P, or CAE
applications.
❏ Choose
for CITIfile, S2P, and CAE applications or when you
want to import the information into a spread sheet using comma-separated values
(CSV) format.
(CSV) format.
7. Press
.
ASCII Data Formats
CITIfile
CITIfile (Common Instrumentation Transfer and Interchange file) is an ASCII data format
that is useful when exchanging data between different computers and instruments.
CITIfiles are always saved when the ASCII format has been selected as shown:
that is useful when exchanging data between different computers and instruments.
CITIfiles are always saved when the ASCII format has been selected as shown:
Select one of the following choices:
—
—
—
—
DATA ARRAY ON RAW ARRAY ON
FORMAT ARY ON
DATA ARRAY ON
GRAPHICS ON
GRAPHICS ON
DATA ONLY ON
DATA ONLY ON
SAVE USING BINARY
SAVE USING ASCII
RETURN SAVE STATE
Save/Recall
DEFINE DISK-SAVE
DATA ARRAY ON
DATA ONLY ON
RAW ARRAY ON
FORMAT ARY ON
SAVE USING ASCII
RETURN
SAVE STATE