Chauvet 550 Manuale Utente
Legend™ 550 User Manual
11
1/11/2010 11:36 AM
Replacing Gobos
1. Unscrew the 4 screws (S1) to detach the top cover.
2. For the rotating gobo wheel, it is a simple matter of removing
the slot-n-lock gobo single assembly. Using your thumb and
forefinger, grasp the gobo and remove it fro the gobo wheel.
forefinger, grasp the gobo and remove it fro the gobo wheel.
3. Then, using a small prying tool, remove the gobo tension ring and remove from the gobo aperture.
4. Push the gobo with your finger from the back side following the same direction that the tension
ring was removed.
Caution!
Tension ring could pop out abruptly and fall inside the fixture. Please use caution when
removing and if necessary use both hands.
removing and if necessary use both hands.
Note!
Replacing the gobos on the static gobo wheel is achieved using the same method as the
rotating gobo wheel. However, the gobo wheel is not slot-n-lock.
rotating gobo wheel. However, the gobo wheel is not slot-n-lock.
S1