Xerox 4118 Guida Utente

Use these instructions to install the WorkCentre 4118 on an AppleTalk network using 
CentreWare Internet Services. 

There are two stages required to install the device on an AppleTalk network using CentreWare 
Internet Services:

¾

Configure the WorkCentre 4118

This procedure explains how to use CentreWare Internet Services to 
configure the device.

¾

Test Print

A print job should be submitted to ensure the device has been installed and 
configured correctly.

To complete the installation of the WorkCentre 4118, perform these steps:

¾

Enable CentreWare Internet Services (see “Enabling Internet Services” on page 7-5).

¾

At the CentreWare Internet Services Home Page for the WorkCentre 4118, select the 
[Properties] tab.

¾

Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and 
then select the [+] symbol to the left of the Protocols folder. 

¾

In the Properties frame, within the Protocols folder, select [AppleTalk].

¾

Make the following selections and settings in the AppleTalk Physical Configuration section 
of the Protocols frame:

Select the checkbox to enable AppleTalk.

Enter the [Printer Name]. Use a meaningful name, such as the location of the 

device.

Choose the Zone where the printer resides from the drop-down menu.

¾

Click the [Apply] button to implement any changes.