Xerox 4118 Guida Utente

Use these instructions to configure the Simple Service Discovery Protocol (SSDP) using 
CentreWare Internet Services.

To configure SSDP, perform these steps:

¾

Enable CentreWare Internet Services (see “Enabling Internet Services” on page 7-5).

¾

At the CentreWare Internet Services Home Page for the WorkCentre 4118, select the 
[Properties] link.

¾

Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and 
then select the [+] symbol to the left of the Protocols folder. 

¾

Select [SSPD] and check the Protocol Configuration details are correct. If any of the 
details are incorrect then enter the correct information.

¾

Make the following selections and settings in the General section of the Protocols frame:

Select the checkbox to enable SSDP.

Enter the [Time to Live] (1 to 60 hops).

¾

Click the [Apply] button to implement any changes.

NOTE: Click the [Undo] button to cancel any changes made and return to the 
previous values.

¾

Select the [Status] tab and then select [Reset Network Controller] to enable the selections 
to take effect.