Xerox 4118 Guida Utente

Use these instructions to enable or disable LPR/LPD using CentreWare Internet Services.

There are two stages required to install the device on a LPR/LPD network using CentreWare 
Internet Services:

¾

Configure the WorkCentre 4118

This procedure explains how to use CentreWare Internet Services to 
configure the device.

¾

Test Print

A print job should be submitted to ensure the device has been installed and 
configured correctly.

To complete the installation of the device, perform these steps:

¾

Enable CentreWare Internet Services (see “Enabling Internet Services” on page 7-5).

¾

At the CentreWare Internet Services Home Page for the WorkCentre 4118, select the 
[Properties] tab.

¾

Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and 
then select the [+] symbol to the left of the Protocols folder. 

¾

In the Properties frame, within the Protocols folder, select [LPR/LPD].

¾

Select the checkbox to enable LPR/LPD.

Enter the [Port Number].

NOTE: While you can change the port number at which the WorkCentre 4118 will 
accept LPR print jobs, it is recommended that you do this ONLY with extreme 
caution as most LPR spoolers are set to send print jobs to the default port number, 
515.

¾

Click the [Apply] button to implement any changes.