Xerox 4118 Guida Utente

Use these instructions to enable or disable Raw Printing using CentreWare Internet Services.

There are two stages required to install the device on an Raw TCP/IP printing network using 
CentreWare Internet Services:

¾

Configure the WorkCentre 4118

This procedure explains how to use CentreWare Internet Services to 
configure the device.

¾

Test Print

A print job should be submitted to ensure the device has been installed and 
configured correctly.

To complete the installation of the WorkCentre 4118, perform these steps:

¾

Enable CentreWare Internet Services (see “Enabling Internet Services” on page 7-5).

¾

At the CentreWare Internet Services Home Page for the WorkCentre 4118, select the 
[Properties] tab.

¾

Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and 
then select the [+] symbol to the left of the Protocols folder. 

¾

Select [Raw TCP/IP Printing].

Select the checkbox to enable Raw TCP/IP Printing.

Enter the [Port Number] and then enter the required port number.

NOTE: While you can change the port number at which the WorkCentre 4118 will 
accept RAW print jobs, it is recommended that you use the default port, 9100. this is 
the industry standard

¾

Click the [Apply] button to implement any changes.

NOTE: Click the [Undo] button to cancel any changes made and return to the 
previous values.