LG 37LD650H Manuale Utente
29
206-4137
Cloning Procedures
Learning / Teaching a Master TV Setup using a USB Memory Device
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and the EBL is in Pass-through Mode.
2. Plug the USB memory device into the USB IN port on the Master TV.
3. Press
1. Ensure the Master TV is set up completely and the EBL is in Pass-through Mode.
2. Plug the USB memory device into the USB IN port on the Master TV.
3. Press
MENU to display the TV setup menus.
4. Use the arrow navigation keys to select/highlight the
Option menu icon; then, press
the number “
7” key a total of seven times to display the USB Download Menu.
5. To gain access to the Learn From TV option in the USB Download Menu, key in the
password used to enter the Installer Menu (Example: Press
9-8-7-6).
6. Use the Up/Down arrow keys to select
Learn From TV and press ENTER.
7. To identify the profile from others, you can use the Up/Down arrow keys to change
the last five digits of the filename. Press
ENTER when you are ready to initiate
Learning.
Learning status will be shown on the progress bar. When the Learning process is
complete, the USB Download menu will reappear on screen.
8. Remove the USB memory device.
Teach Master TV Setup to Target TV
1. Plug the USB memory device with the Master TV Setup file into the Target TV USB
1. Plug the USB memory device with the Master TV Setup file into the Target TV USB
IN port.
2. Press
MENU to display the TV setup menus.
3. Use the arrow navigation keys to select/highlight the
Option menu icon; then, press
the number “
7” key a total of seven times to display the USB Download Menu.
4. Use the Up/Down arrow keys to select
Teach To TV and press ENTER.
5. Use the Up/Down arrow keys to select/highlight the Master TV Setup you want to
install and press
ENTER. Note: Filenames identify the TV and the TLL version (see
figure at right).
Teaching status will be shown on the progress bar. When the Teaching process is
complete, the USB Download menu will reappear on screen.
6. When Teaching is done, remove the USB memory device, turn OFF the TV, and
unplug the TV power cord for 15 seconds.
7. Reconnect the TV power cord, and turn ON the TV. The Master TV Setup should
be resident on the Target TV.
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Teach To TV
Learn From TV
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Teach To TV
Learn From TV
Learn From TV
UPGRADING...
Do not unplug!
!
25%
Teach To TV
50%
UPGRADING...
Do not unplug!
!
Previous
Teach To TV
xxLG710H-UA00001.TLL
Enter
Previous
Teach To TV
xxLD650H-UA00001.TLL
Enter
USB Cloning Notes
• Read the IMPORTANT CLONING INFORMATION on page 28 before beginning any cloning procedures.
• Do not remove the TV power cord or the USB memory device while Learning or Teaching, as doing so may
• Read the IMPORTANT CLONING INFORMATION on page 28 before beginning any cloning procedures.
• Do not remove the TV power cord or the USB memory device while Learning or Teaching, as doing so may
harm the USB memory device.
• You may edit a filename as part of the Learning procedure; however, a file with edited contents will not be rec-
ognized.
• Since clock data is copied into the USB memory device as numeric data, the time difference between Teaching
and Learning is not automatically adjusted. Either set the clock manually, or use the Auto Clock setting in the TV
setup menus.
xxLG710H-UA00001.TLL
Select the file name and press OK to start
Learn From TV
Previous
Enter
xxLD650H-UA00001.TLL
Select the file name and press OK to start
Learn From TV
Previous
Enter
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Teach To TV
Learn From TV
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Teach To TV
Learn From TV