LG 37LD650H Manuale Utente

Pagina di 167
30
206-4137
Cloning Procedures (Cont.)
Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer
Learn Setup from Master TV
1.  Ensure the Master TV is set up completely and the EBL is in Pass-
through Mode. 
2.  If an analog channel is not available, tune the TV to an Aux source, such 
as AV-1. Then, plug one end of the MPI cable into the TV MPI port. 
3.  Turn ON the TLL-1100A. 
4.  Use the 
MODE button on the TLL-1100A to select Clone Mode.
5.  Use the Left/Right arrows on the TLL-1100A to select the Memory CBank  
(1 to 8) in which to store the Master TV Setup. 
6.  Plug the other end of the MPI cable into the MPI port on the bottom of the  
TLL-1100A. The Clone Selection Menu will display on the TV screen.
7.  Press 
on the Installer Remote to select LEARN FROM TV from the 
Clone Selection Menu. Then, press ENTER to transfer the Master TV 
Setup into CBankX on the TLL-1100A. 
    Learning usually takes about 90 seconds. “LEARNING IN PROGRESS” 
will be displayed on the screen while the TLL-1100A copies the Master 
Setup. When the Learning process is complete, a “LEARNING COM-
PLETE” message will be displayed.
Cloning is accomplished using the TV/
clone programmer MPI ports for com-
munication (see figure). 
TLL-1100A Cloning Notes
•  Read the IMPORTANT CLONING 
INFORMATION on page 28 before 
beginning any cloning procedures. 
•  Ensure the TLL-1100A is either fully 
charged or connected to AC power. 
•  Teaching and Learning is only pos-
sible between identical model TVs/
STBs; however, the TLL-1100A clone 
programmer can store up to eight  
different Master TV Setups.
CLONE SELECTION MENU
Selected Bank: CBankX Saved
(1)  LEARN FROM TV
(2)  TEACH TO TV
(3)  SET CLONE CLOCK FROM TV
(4)  SET TV CLOCK FROM CLONE
(5)  DISPLAY TV SETUP
(6)  DISPLAY CLONE SETUP
CLONE CLOCK  =  XX:XX
TV         CLOCK  =  XX:XX
THE CLONE IS VERSION VX.X.X
-
-
To change menu items, press
channel keys or digits.
To execute item, press Enter.
Warning: Do not connect a clone programmer to any PPV card installed in the Master TV or 
any MPI port while the TV is in PPV Mode, or the clone programmer and the PPV card will be 
damaged.
Antenna
or CATV
CLONE SELECTION MENU
Selected Bank: CBankX Saved
(1)  LEARN FROM TV
(2)  TEACH TO TV
(3)  SET CLONE CLOCK FROM TV
(4)  SET TV CLOCK FROM CLONE
(5)  DISPLAY TV SETUP
(6)  DISPLAY CLONE SETUP
TV Link
Loader
TLL1100A
Ready
TLL-1100A
ENTER
RECEIVE
SEND
MENU
MODE
CHARGE
MPI 
Cable
TLL-1100A Clone 
Programmer