Cisco Cisco Virtualization Experience Client 2111 Guida Dell'Amministratore
4-13
Cisco Virtualization Experience Client 2112/2212 ICA Administration Guide for WTOS 7.0_214
OL-215152-01
Chapter 4 Configuring Local Settings Options
Printers
•
Enable the printer device—Must be selected to enable the directly-connected printer.
•
Enable LPD service for the printer—Select this to make the zero client an LPD (Line Printer
Daemon) server for LPD printing requests from the network (see
Daemon) server for LPD printing requests from the network (see
).
Tip
If the zero client is to be used as an LPD printer server, DHCP must not be used and a static IP address
must be assigned to the zero client (see
must be assigned to the zero client (see
LDPs Tab
shows the LDPs tab.
Figure 4-13
Printer Setup—LDPs
Use the following guidelines for the LPDs tab:
•
Select LPD—Select the port you want from the list.
•
Printer Name—Enter the printer name.
•
Printer Identification—Enter the type or model of the printer. This name should be either the device
driver name for the printer under the Microsoft Windows system, or a key to map to the device
driver. If not specified, the name will be defaulted to the printer-supplied identification for standard
direct-connected USB printers or Generic / Text for non-USB connected printers upon connection
to Windows hosts. The driver name mapping takes place either through a printer-mapping file read
by the system as part of the global profile (wnos.ini) or by MetaFrame servers through the
MetaFrame printer configuration file (\winnt\system32\wtsprnt.inf).
driver name for the printer under the Microsoft Windows system, or a key to map to the device
driver. If not specified, the name will be defaulted to the printer-supplied identification for standard
direct-connected USB printers or Generic / Text for non-USB connected printers upon connection
to Windows hosts. The driver name mapping takes place either through a printer-mapping file read
by the system as part of the global profile (wnos.ini) or by MetaFrame servers through the
MetaFrame printer configuration file (\winnt\system32\wtsprnt.inf).
•
LPD Hosts—The DNS or WINS name of the server for the network printer. An IP address can also
be entered.
be entered.
Tip
If the printer is attached to another zero client on your network, the entry in the LPD Hosts box
is the name or address of that zero client.
is the name or address of that zero client.
•
LPD Queue Name—An LPD host maintains a named queue for each supported printer. Enter the
name of the queue associated with the printer to be used.
name of the queue associated with the printer to be used.