Cisco Cisco Virtualization Experience Client 2111 Guida Dell'Amministratore

The LPD Queue Name must match the content of the Printer Name box on the zero client with 
the printer attached.

Printer Class—Select the printer class from the list.

Enable the printer device—Must be selected to enable the directly-connected printer.

 shows the SMBs tab. 

Use the following guidelines for the SMBs tab:

Select SMB—Select the SMB you want from the list.

Printer Name—Enter the printer name.

Printer Identification—Enter the type or model of the printer. This name should be either the device 
driver name for the printer under the Microsoft Windows system, or a key to map to the device 
driver. If not specified, the name will be defaulted to the printer-supplied identification for standard 
direct-connected USB printers or Generic / Text for non-USB connected printers upon connection 
to Windows hosts. The driver name mapping takes place either through a printer-mapping file read 
by the system as part of the global profile (wnos.ini) or by MetaFrame servers through the 
MetaFrame printer configuration file (\winnt\system32\wtsprnt.inf).

\\Host\Printer—Enter the Host\Printer or use Browse next to the box to make the selection you want.

Printer Class—Select the printer class from the list.

Enable the printer device—Must be selected to enable the directly-connected printer.

Enable LPD service—Select this to make the zero client an LPD (Line Printer Daemon) server for 
LPD printing requests from the network (see