Cisco Headend Digital Broadband Delivery System Guida Utente
4002178 Rev C
Pay-Per-View and Impulse Pay-Per-View Options
11-5
Enable the Purchase PIN Lockout,
Continued
Recommended Setting
Enable the lockout.
Disable the Purchase PIN for a Group of Set-Tops
You can disable the Purchase PIN for a group of set-tops with the IIH utility. For
step-by-step instructions, see Reset DHCT PINs With the setPin Transaction in
Chapter 8 of the CoolTools Utilities User's Guide.
Enabling the Purchase PIN Lockout
To enable the Purchase PIN Lockout, complete the following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the PIN Entry tab.
Result: The PIN Entry tab appears in the forefront.
Result: The PIN Entry tab appears in the forefront.
5.
Be sure the Enable Purchase PIN Lockout field under Purchase PIN is
selected.
6.
Click Save.
Result: All PIN entry is locked out after a subscriber enters an invalid PIN
Result: All PIN entry is locked out after a subscriber enters an invalid PIN
according to the lockout parameters that you specify.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.