ATTO Technology FC-84EN ユーザーズマニュアル
17
5
Run the esxupdate update command.
Note
If the hardware is not already installed on the
system, run the esxupdate command with
the --noreboot option, shut down the host
machine manually, install the hardware, and
then boot the host machine. This allows you
to install in a single boot.
system, run the esxupdate command with
the --noreboot option, shut down the host
machine manually, install the hardware, and
then boot the host machine. This allows you
to install in a single boot.
The server reboots after the driver update.
6
Remove the driver CD from the CD-ROM drive
before the system reboots.
before the system reboots.
7
After the system reboots, log in to ESX Server.
8
Verify that the driver is installed successfully:
a. Run the esxupdate query command and
a. Run the esxupdate query command and
verify that the information about the driver
is mentioned in the resulting message.
is mentioned in the resulting message.
b. View the PCI ID XML file in the
/etc/vmware/pciid/ directory. The driver
information is available in the file.
information is available in the file.
c. Check for the latest version of the driver
module in /usr/lib/vmware/vmkmod/
d. To verify that the driver is loaded and
functioning, run the vmkload_mod -l
command. The driver is listed in the
displayed list.
command. The driver is listed in the
displayed list.
Specialized configurations
Some specialized applications may benefit from
modification of adapter settings. The ATTO Utilities
Installation and Operation Manual provides detailed
information on using ATTO Technology configuration
utilities found on the Installation CD or downloaded
from the
modification of adapter settings. The ATTO Utilities
Installation and Operation Manual provides detailed
information on using ATTO Technology configuration
utilities found on the Installation CD or downloaded
from the