Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド

Getting Started with Switch Management

1-3

For a more detailed discussion of the SmartWizard Discovery utility, continue with this section: 

. For a detailed discussion 

of the Web Browser Interface, see 

To install the switch in a network with a DHCP server, proceed as follows:

1. Connect the FS700TS Smart Switch to a DHCP network. 

2. Power on the switch by connecting its AC-DC power adapter. 

3. Install the SmartWizard Discovery utility, located on the switch installation CD, on your 

computer. 

4. Start the SmartWizard Discovery utility.

5. Click Discover for the SmartWizard Discovery utility to find your FS700TS 10/100 Stackable 

Smart Switch with Gigabit Ports. You should see a screen similar to that shown below.

SmartWizard Discovery utility

No IP address or subnet mask setup needed
Discover all switches on the network
User-friendly interface under Microsoft Windows
Firmware upgrade capability
Password change feature
Provides entry to web configuration of switch

Web browser interface

Password protection
Ideal for configuring the switch remotely 
Compatible with Internet Explorer and Netscape Navigator on any platform
Extensive switch configuration possible 
Configuration backup and restore
Can be accessed from any location via the switch’s IP address
Intuitive browser interface
Most visually appealing