avolites pearl exper ttitan ユーザーズマニュアル
Copyright Avolites Limited 2010
3. Controlling dimmers and fixtures - Page 47
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
C-Colour (colour wheel, CMY mixing)
G-Gobo (gobo wheels, gobo rotate, gobo position)
B-Beam (iris, focus, zoom, beam shaper)
E-Effects (prism)
S-Special (motor speeds)
These groups are used to select which attributes you want to work
G-Gobo (gobo wheels, gobo rotate, gobo position)
B-Beam (iris, focus, zoom, beam shaper)
E-Effects (prism)
S-Special (motor speeds)
These groups are used to select which attributes you want to work
with in many of the functions on the console, particularly when you
are “masking off” certain attributes from being saved.
3.1.10 Using fixture groups
You can create groups of fixtures or dimmer channels, which can then
be quickly selected together by pressing a grey palette button or
typing the group number. You can, for example, make a group for
each type of fixture,
or group by stage left
/ stage right, etc.
The Touch Wing has a
The Touch Wing has a
dedicated window for
Groups, allowing you
to quickly recall each
group from a named
touch button. If the
Groups window is not
visible you can show
it by pressing View,
[Show workspace window], [Groups].
1> Select the fixtures/dimmers you want in the group (the order in
which you select them will also be stored in the group).
2> Press the grey Group button (top right of the numeric keys).
3> Press [Record Group]
4> If you want to, use [User Number] to enter a number for the
3> Press [Record Group]
4> If you want to, use [User Number] to enter a number for the
group, or [Provide a legend] to set a legend.
5> Press a Palette button (below a preset fader) or touch a Group
touch button where you want to store the group, or press
[Store] to store as a numbered group.
6> Press Clear then repeat from 1 to store other
groups.
•
You can also press the Avo button and the Group
button to go directly to the Record Group menu, or
on the Touch Wing touch the button twice to use
Quick Record – on the first touch the button will turn red with a
+, on the second touch the group will be recorded.
•
To select all the fixtures/dimmers in a group, just press the
grey palette button or touch the touch button for the group.
•
The order in which you originally selected the fixtures when
creating the group is also stored. This takes effect when you
use the last fixture – next fixture functions described in the
next section, and when you use Shapes, Fan mode and Fixture
Overlap functions. You can change this later, see page 74.
•
Groups are shown on the heads-up display.