avolites pearl exper ttitan ユーザーズマニュアル

3. Controlling dimmers and fixtures  - Page 49

 

 

 

 

PearlExpertTitan_Man_v3.doc  29/03/2010 13:28:00 

Moving head fixtures can point at the same stage position from two 

possible yoke positions. Sometimes to get the fixture moving the 

same as other fixtures, you need to swap to the opposite yoke 

position and the Flip function lets you do that.   

 

Fan mode automatically spreads out the values on a selected range of 

fixtures. If used on pan and tilt, the result is spreading out “rays” of 

light beams. The first and last fixtures of the range are affected most, 

and the central fixtures are affected least. The amount of fan can be 

set using the attribute wheels. 
As with shapes, the order in which you select the fixtures sets how 

the fan effect works. The fixtures you select first and last will be the 

ones which change most. If you use a group to select the fixtures, 

the order you selected the fixtures when you recorded the group is 

used. 
The fan effect, while normally used on pan or tilt attributes, can be 

applied to any attribute. 

 
Fan mode needs to be used on at least 4 fixtures to give good effects. 

If you have an odd number of fixtures, the central fixture will not 

move in fan mode. 
Press the Fan button again to leave Fan mode. Any effects you have 

set will remain in the programmer.  

• 

It’s fairly easy to accidentally leave Fan mode turned on and be 

very confused about why the wheels aren’t working properly, so 

turn it off as soon as you have completed the effect. 

It can sometimes be useful to display and edit exactly what each 

fixture is doing. The Channel Grid window allows you do to that. 

Display it by pressing the Channel Grid button below the screen, or 

press View then [Show workspace window] then [Channel Grid].