Philips hp4654 ユーザーズマニュアル

This new Philips SalonCurl Pro curler has been specially 

designed to give you perfect big curls and volume in 

an instant, without damaging your hair. The adjustable 

temperature enables you to adjust the curler to your hair 

type to create the type of curls you want. We hope you 

will enjoy using your SalonCurl Pro.

A

  Cool tip 

B

  Barrel 

C

  Stand

D

  Handle

E

  Lever

F

  Clip

G

  Ready light

H

  LCD display

I

  Temperature buttons 

J

  On/off button

K

  Slide-on spiral

Read these instructions for use carefully before using the 

appliance and save them for future reference.

Check if the voltage indicated on the appliance 

corresponds to the local mains voltage before you 

connect the appliance.

Check the condition of the mains cord regularly. 

Do not use the appliance if the plug, the cord or 

the appliance itself is damaged. 

If the mains cord is damaged, it must be replaced 

by Philips, a service centre authorised by Philips 

or similarly qualified persons in order to avoid a 

hazard.

Keep this appliance away from water! Do not use 

this product near or over water contained in baths, 

washbasins, sinks etc. When used in a bathroom, 

unplug the appliance after use since the proximity 

of water presents a risk, even when the hairdryer is 

switched off.

For additional protection we advise you to install a 

residual current device (RCD) with a rated residual 

operating current not exceeding 30mA in the 

electrical circuit supplying the bathroom. Ask your 

installer for advice.

The barrel and the clip of this appliance become 

hot during use. Prevent contact with the skin.

Keep the appliance out of the reach of children.

Only use the appliance on dry hair.

For safety reasons, the curler automatically 

switches off after having been on for 1 hour.

Always unplug the appliance after use.

Do not wind the mains cord round the appliance.

Wait until the appliance has cooled down before 

storing it.

Keep the barrel clean and free of dust, dirt, 

styling spray and gel. Never use the appliance in 

combination with styling mousse, styling spray, gel 

etc.

Always return the appliance to a service centre 

authorised by Philips for examination or repair. 

Repair by unqualified people could cause an 

extremely hazardous situation for the user.

The barrel has a ceramic coating. This coating will 

wear in the course of time. When this happens, the 

appliance will still function normally.

This Philips appliance complies with all standards 

regarding electromagnetic fields (EMF). If handled 

properly and in accordance with the instructions in this 

instruction manual, the appliance is safe to use according 

to scientific evidence available today.

Everybody wants shiny and beautiful hair. A good hair-

washing routine can help to achieve this.

  1 

 When washing your hair, wet your hair thoroughly 

for 30-60 seconds.

  2 

 Pour some shampoo into the palm of your hand. 

Spread it between your hands and distribute it 

evenly through the hair.

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

  3 

 Gently massage your hair and scalp. Do not rough 

up the hair or pull long hair up onto the scalp, as 

this may cause tangles.

  4 

 Massage your scalp with your fingertips.This 

stimulates blood circulation and is gentler to the 

hair cuticles.

  5 

 Rinse your hair thoroughly, as poor rinsing can 

result in dull hair.

  6 

 Finish with a cold rinse for extra shine.

To get professional styling results, it is essential to prepare 

your hair for curling. Dry you hair properly with a 

hairdryer to ensure a professional, smooth finish.

  1 

 After washing, squeeze excess water out of the hair 

with your hands and then towel-dry the hair. 

Use a comb to disentangle hair gently from the roots to 

the tips.

  2 

 Dry your hair by making brushing movements with 

the dryer at a small distance from your hair.

  3 

 When you have finished drying, set the hairdryer to 

the cold setting for a final cold shot. This closes the 

cuticles and leaves your hair glossier.
Using the appliance 
Which temperature to use

Curling irons are powerful styling tools and should always 

be used with care.
If you use the curler incorrectly or if you use it at the 

wrong temperature, you could overdry your hair or 

even burn it.

Always select a temperature that is suitable for hair 

type.

Always select a low heat setting when you start 

using the curler for the first time.

For fine or normal hair, select a low to medium 

temperature  
(100-140 

c

C). 

For thick or coarse hair, select a medium to high 

temperature  
(150-180 

c

C). 

Take extra care with pale, blonde, bleached or 

colour-treated hair, since it will be susceptible to 

damage at high temperatures. 

For loose curls or waves use a lower temperature 

than for tight curls.
Setting the temperature

  1 

 Insert the plug into the wall socket.

  2 

 Press the on/off button. (Fig. 2)

The light turns red to indicate that the appliance is 

heating up.

The display shows the selected temperature (default 100 

c

C) and the remaining time of the curling session. 

  3 

 You can adjust the set temperature by pressing 

the + and - buttons. Look at the display to see the 

temperature you have selected. The light burns red 

as long as the appliance is heating up to the set 

temperature. (Fig. 3)

The light turns green as soon as the set 

temperature has been reached. (Fig. 4)

The bars on the display show the remaining usage 

time of the appliance. The total usage time is 60 

minutes. Every ten minutes one of the six bars will 

disappear.
Curling your hair

  1 

 Divide your hair into locks and put them aside with 

clips.  (Fig. 5)

The thinner the lock of hair, the tighter the curl will be.

  2 

 Start at the lower part of your head and work your 

way up to the crown.

  3 

 Take the lock you want to curl and comb it first, to 

get rid of tangles. (Fig. 6)

  4 

 Take the lock of hair, open the clip by pressing the 

lever and place the lock between the barrel and the 

clip.  (Fig. 7)

,

,

,

,

,

,

,

,

  5 

 Release the lever and slide the barrel to the end of 

the lock. (Fig. 8)

  6 

 Take the cool tip between your fingertips and wind 

the hair around the barrel until you have almost 

reached your scalp. Make sure the end of the lock is 

wound in the required direction. (Fig. 9)

  7 

 Hold for 15 seconds.

  8 

 Unwind the lock of hair until the clip can be 

opened again by means of the lever. (Fig. 10)

Only slide the spiral on or off the barrel when the 

appliance has cooled down, to avoid burning your 

fingers.

With the spiral you can create ringlets by winding 

the lock round the barrel following the spiral 

profile. 

Tip: when putting the appliance down, put it on its stand 

to avoid burn marks on your furniture. Never leave the 

appliance unattended when it is plugged in.

  1 

 Make sure the appliance is switched off and 

unplugged.

  2 

 Let the appliance cool down completely on its 

stand.

  3 

 Clean the appliance with a damp cloth.

Never wind the mains cord round the appliance.

Environment
Do not throw the appliance away with the normal 

household waste at the end of its life, but hand it in 

at an official collection point for recycling. By doing 

this you will help to preserve the environment. (Fig. 

11)
Guarantee & service 

If you need information or if you have a problem, please 

visit the Philips website at www.philips.com or contact 

the Philips Customer Care Centre in your country (you 

will find its phone number in the worldwide guarantee 

leaflet). If there is no Customer Care Centre in your 

country, turn to your local Philips dealer or contact the 

Service Department of Philips Domestic Appliances and 

Personal Care BV.

If problems should arise with your curler and you are 

unable to solve them by means of the troubleshooting 

guide below, please contact the nearest Philips service 

centre or the Philips Customer Care Centre in your 

country.

The appliance does not work at all.

  1 

 Perhaps there is a power failure or the socket is 

not live. Check if the power supply is working. If it 

is, check whether the socket is live by plugging in 

another appliance.

  2 

 Check if the mains cord of the appliance is 

damaged. If the mains cord is damaged, it must be 

replaced by Philips, a service centre authorised by 

Philips or similarly qualified persons in order to 

avoid a hazard.

,

,

,

,

4222.002.6551.1

2/4