Korg D3200 ユーザーズマニュアル

ページ / 200
167
Index
CD-R/RW
Can’t write
No further data can be written to a CD-R/RW disc that 
has been finalized. (
No data can be written to a CD-RW disc that contains 
data written by another device.
Failed while writing to CD.
→ Select an appropriate speed for writing to CD-R/RW. 
If you failed while writing at the highest speed, try a 
slower speed. In some cases if you are using a disc that 
is optimized for high-speed writing, you may be una-
ble to write at low speeds.
→ Try a different disc.
Can’t select some speeds when writing to CD.
→ The speeds that you can select will differ depending on 
the type of disc.
Can’t create an audio CD.
→ Use a blank disc.
Can’t play back on an audio CD player
Did you finalize the disc?
→ In the CDTrack at once page, click the Finalize button 
to finalize the disc. (
Did you use CD-R disc?
→ Some CD players are unable to play back CD-RW 
discs. We recommend that you use CD-R discs.
Have you tried using a different type of disc?
→ Even when the recommended media is used, some CD 
players are unable to play back certain types of CD-R/
RW disc. You may be able to play back successfully if 
you use a different type of CD-R/RW disc.
Audio files
Can’t preview
Is the audio file format supported?
→ Preview a WAV file of a supported format. (→p.86, 
USB
Computer does not recognize the D3200
Is the USB cable connected correctly? (
Recognition may also fail on some models of Macintosh 
for specific versions of the operating system. In this case, 
leave the D3200 in USB mode, and disconnect and then 
reconnect the USB cable so that the D3200 will be 
recognized.
Error occurred when you disconnected the D3200 
from the computer
Use the correct procedure to disconnect. (
When you connected the D3200, the computer 
asked you to install software or a device driver
Does the operating system of your computer support the 
D3200? (
Startup
The display hangs at “Start up from CD. Wait CD 
Mount.” and startup does not occur
Use the recovery CD to start up the D3200. (