Datalogic Scanning PD7100 사용자 설명서

Datalogic 2 of 5

This feature specifies one of the barcode lengths for 

Datalogic 2 of 5 Length Control

.

Length 2 is the maximum label length if in 

Variable Length

 Mode, or the second fixed 

length if in 

Fixed Length

 Mode. The length includes the barcode’s check and data char-

acters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length 
(only one fixed length).

Follow these instructions to set this feature:

1. Determine the desired character length (from 2 to 50, or 0 to ignore this length). 

The length must be an even number.

2. Pad the number with leading zeroes to yield two digits. For example: 0 = 00, 5 = 

05, 20 = 20, etc.

3. Scan the ENTER/EXIT PROGRAMMING MODE barcode to enter Program-

ming Mode.

4. Scan the barcode: SELECT Datalogic 2 of 5 LENGTH 2 SETTING.

5. Scan the appropriate two digits from the keypad in 

Appendix E, Keypad

, that rep-

resent the length setting which was determined in the steps above. You will hear a 
two-beep indication after the last character.

6. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Program-

ming Mode.

This completes the procedure. See 

Table 28

 for some examples of how to set this feature.

Ignore This Length

4 Characters

14 Characters

50 Characters

00

04

14

50

Appendix E, Keypad

‘0’ and ‘0’

‘0’ and ‘4’

‘1’ and ‘4’

‘5’ AND ‘0’