TP-LINK TL-SG3210 사용자 설명서

 

114

 

The storm-control broadcast command is used to enable the broadcast 

control function. To disable the broadcast control function, please use no 

storm-control broadcast command. Broadcast control function allows the 

switch to filter broadcast in the network. If the transmission rate of the broadcast 

packets exceeds the set bandwidth, the packets will be automatically discarded 

to avoid network broadcast storm. 

storm-control broadcast [ rate rate ] 

rate  —— Specify the bandwidth for receiving broadcast packets on the port. 

The packet traffic exceeding the bandwidth will be discarded. By default, the 

value is “128K”.   

Interface Configuration Mode (interface gigabitEthernet / interface range 

gigabitEthernet) 

Enable the broadcast control function for port 5:   

TL-SG3424(config)# interface gigabitEthernet 1/0/5 

The storm-control multicast command is used to enable the multicast control 

function. To disable the multicast control function, please use no storm-control 

multicast  command. Multicast control function allows the switch to filter 

multicast in the network. If the transmission rate of the multicast packets 

exceeds the set bandwidth, the packets will be automatically discarded to avoid 

network broadcast storm. 

storm-control multicast [ rate rate ]