TP-LINK TL-SG3210 사용자 설명서

 

116

 

The bandwidth command is used to configure the bandwidth limit for an 

Ethernet port. To disable the bandwidth limit, please use no bandwidth 

command.   

bandwidth {[ ingress ingress-rate ] [ egress egress-rate ]} 

no bandwidth { all | ingress | egress } 

ingress-rate  ——  Specify the bandwidth for receiving packets. Range:1-102400 

for the megaport, 1-1024000 for the gigaport.   

egress-rate  ——  Specify the bandwidth for sending packets. Range:1-102400 

for the megaport, 1-1024000 for the gigaport. 

Interface Configuration Mode (interface gigabitEthernet / interface range 

gigabitEthernet) 

Configure the ingress-rate as 5120Kbps and egress-rate as 1024Kbps for port 

5: 

TL-SG3424(config)# interface gigabitEthernet 1/0/5 

TL-SG3424(config-if)# bandwidth ingress 5120 egress 1024 

The clear counters command is used to clear the statistic information of all the 

Ethernet ports. 

clear counters 

Global Configuration Mode 

Clear the statistic information of all ports