Ariston E-COMBI 24 30 38 Manual Do Utilizador

14

- Remove the boiler casing as described on page 16
- Remove the caps and connect the valves to the boiler using the 

washers provided

- 4 x fi bre washers for the CH fl ow and return, cold water inlet and hot 

water outlet connections

Please check that you are familiar with the installation requirement 
before commencing work (pages 7 - 13).
The installation accessories described in the following list are included 
in the boiler packaging:
- Hanging 

bracket

-  A paper template (showing the dimensions of the boiler with 5 

mm side clearances)

- 

Connection valves (compression)

- Washers
- Filling 

loop

- 

Installation, Servicing and Operating Instructions

- Flue 

gasket

The paper template can be used to ensure the correct positioning of 
kitchen cabinets etc.
The paper template has to be fi xed to the wall and used to locate the 
position of the hanging bracket and the centre for the fl ue hole.
Drill and plug the wall and secure the hanging bracket using the 
screws provided ensure the hanging bracket is level.  Remove the 
boiler from its packaging and remove the front casing panel.
Place the boiler on the hanging bracket.
N

Note: Connections viewed from behind boiler

Note: Connections viewed from behind boiler