Samsung SCX-6555NX Manual Do Utilizador

This function is used when a high priority fax need to be sent ahead of 

reserved operations. The original is scanned into memory and immediately 

transmitted when the current operation is finished. In addition, priority 

transmission will interrupt a sending to multiple destinations between 

stations (example, when the transmission to station A ends, before 

transmission to station B begins) or between redial attempts.
1. Press Fax from the Main screen.
2. Place the originals face up in the DADF.
3. Adjust the document settings in the Image tab and the Basic tab.
4. Press the Advanced tab > Priority Send.
5. Press On.
6. Press OK.
7. Press Start to start the urgent fax job.

This section explains how to receive a fax, and the special receiving 

methods available.

Your machine is preset to Fax mode at the factory. When you receive a fax, 

the machine answers the call on a specified number of rings and 

automatically receives the fax. But if you want to change the Fax mode to 

another mode, refer to next steps.
1. Press Machine Setup on the control panel.
2. Select Admin Setting. When the login message pops up, then enter 

password and press OK. (See "Setting the authentication password" on 

3. Press the Setup tab > Fax Setup > Fax Initial Setup > Receive Mode. 
4. Select the option.

•

Telephone: Receives a fax by pressing On Hook Dial and then 

Start. 

•

Fax: Answers an incoming fax call and immediately goes into the fax 

reception mode.

•

Answering Machine/Fax: Is for when an answering machine 

attached to your machine. Your machine answers an incoming call, 

and the caller can leave a message on the answering machine. If the 

fax machine senses a fax tone on the line, the machine automatically 

switches to Fax mode to receive the fax.

5. Press OK.

You can receive a fax call by pressing On Hook Dial and then pressing 

Start when you hear a fax tone from the remote machine. The machine 

begins receiving a fax.

To use this mode, you must attache an answering machine to the EXT 

socket on the back of your machine. (See "Rear view" on page 18.)
If the caller leaves a message, the answering machine stores the message 

as it would normally. If your machine detects a fax tone on the line, it 

automatically starts to receive the fax.

This feature works best when you are using an extension telephone 

connected to the EXT socket on the back of your machine. You can receive 

a fax from someone you are talking to on the extension telephone, without 

going to the fax machine.
When you receive a call on the extension phone and hear fax tones, press 
the keys 

 on the extension phone. The machine receives the fax.

Press the buttons slowly in sequence. If you still hear the fax tone from the 
remote machine, try pressing 

 once again.

To change the 

 to, for example, 

, follow the next steps.

1. Press Machine Setup on the control panel.
2. Select Admin Setting. When the login message pops up, then enter 

password and press OK. (See "Setting the authentication password" on 

3. Press the Setup tab > Fax Setup > Receive Start Code. 
4. Select On.
5. Press left/right arrows to display number 9.

6. Press OK.

You may need to prevent your received faxes from being accessed by 

unauthorized people. You can turn on secure receiving mode to restrict 

printing of received faxes when the machine is unattended. In secure 

receiving mode, all incoming faxes go into memory. 
1. Press Machine Setup on the control panel.
2. Select Admin Setting. When the login message pops up, then enter 

password and press OK. (See "Setting the authentication password" on 

3. Press the Setup tab > Fax Setup > Secure Receive. 
4. Select On.
5. Enter passcode with 4 digit number using the number keypad on the 

control panel.

When the memory is full, the machine can no longer receive any 

incoming fax. Secure free memory to resume by removing data stored 

in the memory.

•

If you have set your machine to this mode and your answering 

machine is switched off, or no answering machine is connected to 

EXT socket, your machine automatically goes into Fax mode after 

a predefined number of rings.

•

If your answering machine has a user-selectable ring counter, set 

the machine to answer incoming calls within 1 ring.

•

If you are in Telephone mode when the answering machine is 

connected to your machine, you must switch off the answering 

machine, or the outgoing message from the answering machine 

will interrupt your phone conversation.

•

While the machine is receiving a fax, you can not do the copy job.

To deactivate the Secure Receive feature, press Off. In this case, the 

received fax will be printed out.