Samsung SCX-6555NX Manual Do Utilizador

1. Press Fax > the Basic tab > Individual.

•

Edit: Changes the ID, Speed Dial No., and Fax No..

•

New: Creates the new Speed Dial No..

•

Delete: Deletes the selected Speed Dial No..

•

Search: Searches the fax number which currently stored in 

Individual phonebook. When the keyboard pops up, enter ID.

•

Detail: Shows ID, Fax No. and Included group information if it is 

grouped. (See "Storing individual fax numbers (Speed Dial No.)" on 

•

Apply: Inputs the selected fax number to the sending fax number list 

in the Basic tab.

•

Cancel: Cancels the current job and goes to the previous screen.

2. Press New.
3. Enter the name of the fax number in the ID field with the pop up 

keyboard, and the fax number in the Fax No. area using the number 

keypad on the control panel. 

•

ID: Enters the name. 

•

Speed Dial No.: Is automatically filled with the first free number. If 

you want to assign to a different number, use left/right arrows.

•

Fax No.: Enters a fax numbers, only the numbers, with the area 

code if necessary. 

4. Press OK.

1. Press Fax > the Basic tab > Group.
2. Press New.
3. Press the input area in Group Dial ID, then the keyboard pops up, enter 

the name.

4. Select Group Dial No. with left/right arrows.

•

Group Dial ID: Enters the group name. 

•

Group Dial No.: Is automatically filled with the first free number. If 

you want to assign to a different number, use left/right arrows.

5. Press OK.
6. Select an entry from Speed Dial List, and press Add. Repeat this step 

until you added entries you need.

Make sure the selected Speed Dial List is copied to the left pane, 

Group list.

7. Press OK to save the numbers.

You can store fax numbers conveniently from the networked computer 

using SyncThru Web Service.
1. Open the web browser in your computer.
2. Enter IP address of your machine, then SyncThru Web Service shows.

(Example. http://123.123.123.123)

3. Press Machine Settings > Fax Setup > Fax Phone Book.
4. Select Speed Dial (Individual). 

5. Press Add.
6. Enter Index, Name and Phone Number. Index you enter here will be 

the Speed Dial No. in the display screen of your machine.

7. Press Apply.

Polling is used when one fax machine requests another to send a 

document. This is useful when the person with the original document is not 

in the office. The person who wants to receive the document, calls the 

machine holding where the original is stored and requests that the 

document be sent. In other words, it "polls" the machine holding that has the 

original.

The polling process is as follows:
1. Sender stores the originals in the machine. (See "Storing the originals 

2. Sender gives the Passcode to the receiver.
3. Receiver dials the fax number and enters the Passcode when 

requested. (See "Polling a remote fax" on page 66.)

Fax numbers are already stored in Speed Dial (Individual) can be 

used when selecting.

Speed Dial numbers can be imported from an *.csv file. 

To use this feature, both the sender and receiver must have the polling 

feature.