Samsung SCX-6555NX Manual Do Utilizador

Since your machine is a multi-tasking device, it can receive faxes while you 

are making copies or printing. If you receive a fax while you are copying or 

printing, your machine stores incoming faxes in its memory. Then, as soon 

as you finish copying or printing, the machine automatically prints the fax. 

Before sending a fax, you can adjust the document settings, such as 

resolution, darkness, color, duplex and so forth. Refer to explanation of this 

section.

This function is especially intended for two-sided originals. You can select 

whether the machine sends the fax on one side or both sides of the paper. 
Load the originals onto the DADF to use this function.
Press Fax > the Basic tab > Duplex. Use left/right arrows to toggle the 

value. 

•

1 Sided: Is for the originals that are printed on one side only.

•

2 Sided: Is for the originals that are printed on both sides. 

Changing the resolution setting affects the appearance of the received 

document. 
Press Fax > the Basic tab > Resolution. Use left/right arrows to toggle the 

values.

•

Standard: Usually recommended for originals with text. This option 

will reduce the transmission time.

•

Fine: Recommended for the originals containing with small 

characters, thin lines, or text that was printed using a dot-matrix 

printer. 

•

Super Fine: Recommended for originals containing with extremely 

fine detail, this option is enabled only if the receiving machine also 

supports a Super Fine resolution.

You can set the original document type to enhance the quality of a 

document being scanned. 
Press Fax > the Image tab > Original Type. Select the appropriate option 

on the screen and press OK.

•

Text: For originals with text or line art.

•

Text/Photo: For originals with both text and photographs together.

•

Photo: For originals that are continuous tone photographs.

You can select the degree of darkness of the original document. 
Press Fax > the Image tab > Darkness. Press the right arrow to enhance 

the darkness degree and press OK.

You can lighten, reduce or delete the dark backgrounds from scanned 

colored paper or newspaper originals.
Press Fax > the Image tab > Erase Background. Select the appropriate 

option and press OK. 

•

Off: Disables this feature.

•

Auto: Optimizes the background.

•

Enhance: The higher the number is, the more vivid the background 

is. 

•

Erase: The higher the number is, the lighter the background is. 

You can transmit a fax in color using this feature. But this feature only 

applies when you send a fax using On Hook Dial on the control panel.
Press Fax > the Image tab > Color Mode. Select option and OK.

•

Mono: Transmits a fax in black and white.

•

Color: Transmits a fax in color.

Use this feature to store destination names, fax numbers and transmission 

settings in your machine. There are two options, Individual and Group.

•

Individual: Stores up to 200 fax numbers. And the fax numbers which 

are stored in Individual work as Speed Dial No..

•

Group: Makes groups when you frequently send the same document to 

several destinations. You can store up to 100 group dial numbers. 

Entries stored here will be available for selection within the sending list 

on the Basic tab of Fax. Dialing Group can be also setup comprising of 

many Individual entries.

The fax numbers, which are stored in Individual, work as Speed Dial No..

The document setting herein is for only current job. If you want to 

change the default setting on document settings, refer to Admin 

Setting > General tab > Default Settings. (See "General settings" on 

For memory transmission, Super Fine mode is not available. The 

resolution setting is automatically changed to Fine.

Erase Background is disabled if the Original Type is set to Photo.

Color Mode faxes are only supported when faxes are sent manually.