Nintendo SPR-001 Manual Do Utilizador

  If you have applied a commercially available protective sheet to the Touch Screen, refer to its 

instruction manual and be sure it has been applied correctly before attempting to calibrate  
the Touch Screen. Please make sure you only use a protective sheet that has been licensed by 
Nintendo.

 

  If the system is subjected to sudden changes in temperature or physical shocks, the sensor can 

start to produce false responses. In these cases, carry out the following steps to recalibrate 
the sensor.

 

Note: When CALIBRATE is touched, the system will consider the position it is in to be level. 
The settings for the motion sensor will be adjusted accordingly.

On the HOME Menu, press and hold the Y Button and B Button for 3 seconds to open  
the Motion Sensor Calibration Screen. Place the system on a level surface and touch 
CALIBRATE or REVERT TO DEFAULT SETTINGS.

  If the screen stays black when you turn the system on or when you exit Sleep Mode (reopen 

the system after closing it while the power is on), or the screen suddenly goes black during 
gameplay and the system stops responding, turn the system off by holding the POWER Button 
down until the Power LED goes out, then press the POWER Button again to turn the system 
back on.

 Try adjusting the volume by using the volume control on the side of the system.

  If headphones are attached to the Nintendo 3DS XL, no sound will come through the speakers.

Note: The camera’s shutter sound will always be played at a fixed volume, regardless of the current 
setting of the volume control and even if headphones are connected.

 Try adjusting the volume by using the volume control on the side of the system.

 Make sure the plug of the headphones is securely plugged into the audio jack.

  Certain products can obscure the clarity of 3D images. Please make sure you only use a protec-

tive sheet that has been licensed by Nintendo. Refer to the instruction information that comes 
with the product for details on how to apply.

  Using the system in areas with strong light sources can cause the light to reflect on the screen, 

rendering it difficult to see.

  Disable the Parental Controls item which restricts the display of 3D images 

.

  This screen cannot display 3D content.

The 3D effects generated by the Nintendo 3DS XL are created using the binocular disparity  
of the eyes. Everyone will have a different way of viewing 3D images. If you see a double  
image or are unable to see 3D images even when viewing them correctly and with the 
proper settings, please use the 2D display only 

.

  In rare cases, the Circle Pad’s input may stop working properly after long periods of use or  

being used forcefully. If the in-game movements do not match the Circle Pad input, use the 
CIRCLE PAD option in System Settings to calibrate the input 

.

Note: If movements are being input despite the Circle Pad not being used, and you are unable to use 
the buttons or Touch Screen, turn the system off, then start it again on the Circle Pad Calibration 
Screen by pressing the POWER Button while pressing and holding L Button + R Button + Y Button.

 

  If the in-game movements do not match the Touch Screen input, use the TOUCH SCREEN option 

in System Settings to calibrate the input 

.

   Note: If you are unable to use the Touch Screen to perform this procedure, turn the system off, then 

start it again on the Touch Screen Calibration Screen by pressing the POWER Button while pressing 
and holding L Button + R Button + X Button.