LG BD430 Manual Do Proprietário

52

The  POWER/TEMP indicator tells in what 

protection state engaged. The user should check 

the  POWER/TEMP indicator and power indicator 

to make sure they work.

When its internal temperature exceeds the normal 

value, it will be automatically powered off to protect 

the parts. When in a cooled state, the power 

indicator will blink. When it is cooled enough 

(restore the normal operating temperature), you 

can press the power key to start up the system.

AUTO

INPUT

OK

/

MENU

Indicator

POWER/TEMP indicator lights red.

- Whether the site where installed is well ventilated, 

   and whether the vent is blocked.

- Whether installed near the vent of air conditioner. 

   it can not be installed at that place.

- Whether the filter is clean. You should clean it

   regularly.

Projector is in OFF state, and POWER/TEMP

indicator flashes red. When any abnormity is 

detected, The projector will be automatically 

powered off to protect its internal parts. At the 

time, the POWER/TEMP indicator will flash red. In 

this case, you should unplug the power cord and 

plug it again, then power on the projector again 

for check. If the projector is still in OFF state and 

POWER/TEMP indicator flashes red, you should 

unplug the power cord and contact the repair 

center for maintenance.