LG BD430 Manual Do Proprietário

54

When moving the projector or not using it for a 

long period, cover the lens cap properly.

Attach the lens cap according to the following 

procedures.

1. Thread the string through the hole on the lens 

    cap and then tie a knot in the string to secure 

    it in place.

2. Loosen the ceiling screw on the bottom and 

    tied the string on it, then tighten the screw.   

Unplug the AC power cord before cleaning.

Apply some non-abrasive cleaning agent 

exclusively designed for cameras onto a piece of 

clean cloth, and then use it to wipe the lens gently. 

Or you can use cleaning paper or commercial 

blower to clean the lens.

Avoid excessive use of cleaning agent. Abrasive 

cleaning agent, solvent or other coarse chemicals 

may scratch the lens.

When not used, you should put it into a box to

avoid dust and scratch.

Unplug the AC power cord before cleaning.

Use a piece of clean cloth to gently wipe the 

surface of projector. If the projector is quite polluted, 

you can apply some neutral cleaning agent onto 

a piece of clean cloth, and use it to wipe the shell. 

Avoid excessive use of cleaning agent. Abrasive 

cleaning agent, solvent or other coarse chemicals 

may scratch the lens.

ceiling screw