LG BD430 Manual Do Proprietário

53

The filter prevents dust from accumulating on the surface of lens assembly. Should the filter become 

clogged with dust particles, it will reduce the cooling fan’s effectiveness and may result in internal heat 

buildup and adversely affect the life of the projector. If a Filter warning icon appears on the screen, you 

should clean the filter immediately. To do that, follow the steps below:

1 Turn off the projector, and unplug the AC power 

   cord from the AC outlet.

2 Release the two hooks and remove the air filter.

3 Gently clean the filter with a brush.

4 Reinstall the filter into the projector properly.

   Ensure that a clicking sound is heard to confirm     

   the filter is completely installed.

Note:

Do not operate the projector when the

filter is removed. Otherwise, dust will be

accumulated on lens and thus affect the

image quality.

Never attempt to place any objects to the

air intake vents. Otherwise, the projector

may malfunction.

1. Press Menu on the remote control to display

    the on screen menu. Press ▲▼ to select the

    icon for the option menu. Then press ► or

    press OK.

2. Press ▲▼ to select "Filter counter reset" , and 

   then press ► or press Select. Press ▲▼ to 

   select "Filter counter reset", then press OK. 

   At the time, you will see the prompt information

   “Reset the filter counter ?” displayed on the 

    screen. Select Yes.

3. When another dialog box pops up, you should

    select Yes and reset the filter.

Note:

Keep from dust and smog.Otherwise, the image 

quality may deteriorate. When operated in an 

environment with dust and smog, the dust and dirt 

will accumulate on its lens, liquid crystal board or

the lens assembly inside the projector. If that 

happens, you should contact the local distributor or 

repair center for correct cleaning.

Air filter

Hooks