TP-LINK TL-MR3420 Manual Do Utilizador

 

Choose menu “DHCP→DHCP Settings”, you can configure the DHCP Server on the page 

).The Router is set up by default as a DHCP (Dynamic Host Configuration 

Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to 

the Router on the LAN.   

 

Figure 4-30  DHCP Settings 



 

DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must 

have another DHCP server within your network or else you must configure the computer 

manually. 



 

Start IP Address - Specify an IP address for the DHCP Server to start with when 

assigning IP addresses. 192.168.0.100 is the default start address. 



 

End IP Address - Specify an IP address for the DHCP Server to end with when assigning 

IP addresses. 192.168.0.199 is the default end address. 



 

Address Lease Time - The Address Lease Time is the amount of time a network user 

will be allowed connection to the Router with their current dynamic IP Address. Enter the 

amount of time in minutes and the user will be "leased" this dynamic IP Address. After the 

time is up, the user will be automatically assigned a new dynamic IP address. The range 

of the time is 1 ~ 2880 minutes. The default value is 120 minutes. 



 

Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the 

Router, default value is 192.168.0.1 



 

Default Domain - (Optional.) Input the domain name of your network. 



 

Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult 

your ISP. 



 

Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP 

provides two DNS servers. 

 

Only when the DHCP Server function of the Router is enabled, can all computers on the LAN 

configured to be "Obtain an IP Address automatically" mode work properly. 

 

-46-