TP-LINK TL-MR3420 Manual Do Utilizador

 

Click the Next button to go to the next page and Click the Previous button to return the 

previous page. 

To Reserve IP addresses:   

1. Click 

the Add New … button. (Pop-up Figure 4-33) 

2.  Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address in 

dotted-decimal notation of the computer you wish to add.   

3. Click 

the 

Save button when finished.   

 

Figure 4-33    Add or Modify an Address Reservation Entry 

1. Click 

the 

Modify in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

 

Figure 4-34 The Forwarding menu 

There are four submenus under the Forwarding menu (shown in Figure 4-34): Virtual Servers, 

Port Triggering,  DMZ and UPnP. Click any of them, and you will be able to configure the 

corresponding function. 

Choose menu “Forwarding→Virtual Servers”, you can view and add virtual servers in the 

next screen (shown in Figure 4-35). Virtual servers can be used for setting up public services 

on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all 

requests from the Internet to this service port will be redirected to the computer specified by 

the server IP. Any PC that was used for a virtual server must have a static or reserved IP 

Address because its IP Address may be changed when using the DHCP function.   

-48-