KitchenAid KDRU763.KDRU Manual Do Proprietário

4. Once the Start key is touched, the probe display appears. If 

the current probe temperature is below 130°F (54°C), the 
display shows “Below 130°F (54°C)”.

The display shows the current probe temperature once it 
reaches 130°F (54°C).

5. During cooking cycle an Adjust Settings key appears on the 

lower right hand corner of the display. Touch ADJUST 
SETTINGS to change the desired probe temperature. Touch 
START to enter new settings.

6. When the set probe temperature is reached, the Check Food 

message appears on the oven display, the probe temperature 
begins to blink.

If enabled, end-of-cycle tones will sound, then reminder 
tones will sound every minute. Touch OK to clear the 
message, stop reminder tones, and continue the current 
cooking cycle.

7. Touch OFF when finished cooking.

8. Always unplug and remove the temperature probe from the 

oven when removing food. The probe symbol will remain lit in 
the display until the probe is unplugged.

Timed Cooking allows the oven(s) to cook for a set length of time. 
Delay Cooking allows the oven(s) to be set to turn on at a certain 
time of day. Delay start should not be used for food such as 
breads and cakes because they may not bake properly.

Timed Cooking is available on most cycles including: Bake, 
Convect Bake, Convect Roast, EasyConvect™ Conversion, 
Bread Proof, and Keep Warm.

Delay Cooking is available on the Bake, Convect Bake, and 
Convect Roast cycles.

1. From the entry selection menu of those cooking functions 

where Cook Time is available, touch COOK TIME.

2. Use the numerical keys to input the desired cook time.

3. Once the Start key is touched, the cook time will be displayed

4. During cooking cycle an Adjust Settings key appears on the 

lower right hand corner of the display. Touch ADJUST 
SETTINGS to change the desired cook time. Touch START to 
enter new settings.

5. When the end of the cook time is reached, the Check Food 

message will appear in the oven display.

If enabled, end-of-cycle tones will sound, then reminder 
tones will sound every minute. Touch OK to clear the 
message, stop reminder tones, and continue the current 
cooking cycle.

6. Touch OFF when finished cooking.

NOTE: For best cooking results, when the temperature probe 
is being used, the Cook Time function cannot be used.

Before setting, make sure the clock is set to the correct time of 
day. See “Clock” section.

1. From the Main menu, touch MORE.

2. Touch DELAY COOK.

3. Use the numerical keys to enter the desired delay time. For 

example, if you would like the oven to turn on in 1 hour and 
20 minutes, enter 1:20.

4. Set the cooking time and adjust cooking temperature.

5. Once the Start key is touched, the Cooking Delayed message 

appears on the oven display, showing the settings.

A countdown timer will be displayed in the lower left hand 
portion of the display showing the time remaining until 
cooking begins.

6. When the start time is reached, the oven will automatically 

turn on. The minute time countdown will appear on the oven 
display.

7. When the end of the cook time is reached, the Bake 

Complete message will appear in the oven display.

If enabled, end-of-cycle tones will sound, then reminder 
tones will sound every minute. Touch OK to clear the 
message, stop reminder tones, and continue the current 
cooking cycle.

8. Touch OFF when finished cooking.