Справочник Пользователя для hussman IGFP-R3

igfP-R3, R3P-0608

installation (cont'd)

wrapping Boards installation instructions

Step 1: Measure 6 inches from wrapping board end.

Step : Measure 10 inches from top of the case.

note: line up 6 inch mark with 10 inch mark.

Step 3: Use bracket center hole to align with cross mark.

note: Use pencil/marker to mark hole pattern.

HOLE PATTERN

Step 4: Drill holes (7/3”)

Screws # 14 X 1”

Step 5: Install bracket with screws (provided)

note: Repeat Steps 1 thru 5 for Second Bracket installation.