Справочник Пользователя для John Deere Products & Services OMGX10902 I0

Operating - 7

Operating

1. Learn all controls and how they work. Read your 
machine's operator manual, if necessary.

2. Lock park brake.

3. Stop engine.

4. Remove key.

5. Make operating adjustments as necessary.

6. Tighten loose hardware.

1. Park machine safely. (See Parking Safely in the Safety 
section.)

2. Raise blade and place wood block under frame channel.

3. Remove six 5/16 carriage bolts and six 5/16 nylock nuts 
(A) to remove scraper blade (B).

4. Turn scraper blade over and install scraper blade. 

5. Adjust skid shoes.

1. Park machine safely. (See Parking Safely in the Safety 
section.)

2. Place the mower lift lever one notch up from its lowest 
position.

3. Tighten both 3/8 nylock nuts (A) up to the bottom of the 
lift channel (B).

1. Park machine on a level surface.

2. Place mower lift handle in the TRANSPORT (upper) 
position.

3. Measure at each end of blade.

4. If one side of blade is low, adjust nut (B) on lift link UP 
on that side to level blade.