Инструкции По Установке для Gaggenau VI491610

9

Sharp edges. Use protective gloves when 
installing the plate.

For safety reasons, the heat shield must be properly 
installed. This prevents components from overheating 
as a result of the recirculation of hot air from the 
cooktop.

The heat shield is the same width as the cooktop. For 
shipping, it is screwed to the burner box.

After unpacking the cooktop, unscrew the heat shield.

The heat shield will be able to rotate freely, as shown 
in the illustration.

Note: Only install the appliance in conjunction with 
the corresponding control console.

Remove the packaging of the control knobs and 
the protective film from the light rings.

Hold the retaining plate against the front panel 
from behind. Stick the control knobs into the 
holes from the front and screw it tight from 
behind with the nuts. Make sure that the control 
knobs are correctly arranged.

Screw the control console tight to the retaining 
plate using the nuts included.