Bosch F.01U.278.516 用户手册

Relay Unit

 Operation | en

Bosch Security Systems

User Manual

F.01U.278.516 | V1.0 | 2012.11

When the Relay Unit is in standby mode:



Press 

 to increase the volume.



Press 

 to decrease the volume.

The Relay Unit uses an alarm buffer and an event buffer for display indication.

The following alarms and messages are stored into the alarm buffer:

–

call for help

–

call for assistance

–

reserve call (call for help 2)

–

technical call

–

fire alarm

–

battery low message

–

error message

–

disconnection of a Relay Unit from the RS-485 bus

If alarms are repeated, only the least recent entry remains in the buffer. The call for assistance 

replaces the call for help, the reserve call and the technical call in the alarm buffer.

In addition to all the alarms, all possible entries are stored in the event buffer.

The following messages are directly stored into the event buffer:

–

acknowledgement MIYN46, sent by an MIYN46 Wall Transmitter, MIYS35 or MIYS37 

Transmitters

–

acknowledgement by MIYS35 or MIYS37 Transmitters

–

local acknowledgement, an acknowledgement at the Main Unit or Relay Unit

–

daily message check

–

personnel arrival message (A, B, C and D)

–

personnel departure message

–

power outage of a receiver unit

–

return of power at a receiver unit

–

backup battery low of a receiver unit

–

interruption of the RS-232 connection interface between the Main Unit and a PC

–

return of the RS-232 connection interface between the Main Unit and a PC

–

connection of a Relay Unit to the RS-485 bus

–

transmission of the event "door" by an MIYRAC Wireless Contact.

The event buffer will normally be filled with the last 18 or 100 entries.

In the alarm buffer, only the active alarms are present.

The alarm and event buffers have a capacity of 18 or 100 entries. See the maximum number of 

events buffered, in the Main Unit user manual.