Honeywell MicroDock II 用户手册

8

The base station pushbuttons are not labelled. The base station 
is operated by pressing the C pushbutton that is located 
directly below the option that displays on the LCD.

1.

To activate the station, press and hold C (the left-
most button) until the following screen displays.

The normal operation screen then displays.

To deactivate the station, complete the following:

1.

Access the normal operation screen (the station can 
only deactivate from the normal operation screen). 

2.

Press C off.

For initial station activation, ensure the inlets are installed cor-
rectly.

• Inlet 1—default connection for ambient air.
• Inlet 2—default connection for four-gas mix (unless oth-

erwise specified when purchased).

• Inlets 3-5—designed connection for additional gases. 

However, unless specified at purchase, inlets 3-5 will be 
configured for ambient air.

a

To confirm that the inlets are set correctly, complete the follow-
ing:

1.

Press C menu to access the user options menu.

2.

Press C   or   to scroll to InletSetup.

3.

Press C sel to access the inlet 1 screen.

4.

Press the C 

 

to scroll to the inlet 2, 3, 4, and 5 

screens.