LaCie 400USB 用户手册

LaCie d2 DVD

±RW Drive 

User Manual

page 

Troubleshooting

The drive’s media 

tray automatically 

ejects a disc when 

you try to record 

on it, or the drive is 

not writing to CD/

DVD correctly.

Is the disc full?

To verifty the contents of the disc:

Use your recording software  OR
Select the disc on the desktop and select 

 from the 

 

menu. If the disc appears empty but the problem persists, try using 

another piece of media.

•
•

Does the drive support the format 

of the disc you have inserted?

Check 

section 1.6, Supported DVD and CD Formats

 for information 

about the different formats supported by your drive.

Is the disc damaged?

Carefully inspect the disc. Look to see if there are highly visible scratch-

es to the recording surface (the bright, shiny, reflective side) of the disc. 

If in doubt, try another disc.

Has the recording software been 

installed correctly?

Double-check the installation of your recording software and re-install 

the software, if necessary. Review the recording software’s trouble-

shooting and help sections for more information about the recording 

software.

Has buffer underrun occurred (has 

something interupted the stream 

of data to the recorder)?

For the best recordings, follow these tips to avoid buffer underrun 

interuptions:

Quit all other running software programs before starting to record.
Disconnect from networks.
If you are making a direct recording, such as a copy, from a CD or 

a DVD, make sure that the speed of the drive playing the CD or 

DVD is fast enough to provide a sufficient data stream to the LaCie 

drive. When making copies, it is recommended that you transfer the 

material to be copied to your hard drive, and then make the recording 

from the data on the hard drive.
Reduce the write speed of the LaCie drive using the appropriate 

menu in the recording software.

•
•
•

•