Quantum acl 4 安装指导

 Chapter 2 Unpacking the Library

Packing the Library for Shipment

ACL 4/52 Facilities Planning and Installation Guide

19

2

To reinstall the left cosmetic panel:

1 Rest the top lip of the left side panel on the library frame.

2 Push the panel toward the front of the library and insert the frame 

buckles into the retention tabs.

3 At the back of the library, insert and tighten the three screws to 

secure the left side panel to the back of the library frame.

4 Unplug the power cord from the library and the power source.

2

To move the library onto the shipping pallet:

1 Raise the library’s leveling feet by rotating each foot clockwise 

until fully retracted.

2 Position the pallet to load the library and secure the two ramp 

sections to the pallet using the Velcro strips.

3 Unfold the shipping bag and align the white tape to the pallet 

where the library casters will roll onto the pallet.

4 Roll the library onto the pallet and into the shipping bag.

5 Observe all cautions and guidelines in “Moving the Library to the 

6 Seal the shipping bag by folding the seam over and taping the 

edge.

7 Disconnect the ramp sections from the pallet and slide them 

underneath the library.

8 Install the stop block in front of the library front casters and secure 

it to the Velcro fasteners.

2

To secure the library to the pallet:

1 Place all accessories (cables, manuals, installation hardware, and so 

forth) in the accessories tray.

You must provide separate shipping container for the tape 
cartridges.

2 Place the accessories tray and foam cap on top of the library (see 

3 Wrap the cardboard box around the library and secure it using the 

cardboard retaining clips.

4 Place the cardboard top cover securely over the cardboard box.

5 Install steel bands to secure the library and packing material to the 

pallet.