avolites pearl expert titan 用户手册
Copyright Avolites Limited 2010
5. Shapes - Page 63
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
5.2
Edit
5.2.1
Editing shapes which are running
If more than one shape is running, you can select which one is
connected to the control wheels using Shape option [Edit].
1> If you are not in the Shape menu, press [Shape Generator] at
the top menu.
2> Press
[Edit].
3> By the softkeys is a list of the currently running shapes.
4> Press a softkey to make the shape active. The active shape is
4> Press a softkey to make the shape active. The active shape is
highlighted.
5> Press Enter to get back to the Shape Generator menu.
•
If you applied the same shape several times to different
fixtures, you can change each copy of the shape independently.
5.2.2
Reversing a shape
You can reverse the direction of a shape by pressing [Reverse
Shapes] from the shape menu, then pressing the softkey for the
shape you want to reverse.
5.3
Delete
5.3.1
Deleting shapes
You can delete a running shape by pressing [Delete] from the shape
menu, then pressing the softkey for the shape you want to delete.
5.4
Advanced options
5.4.1
Shape fade mode
When a shape is stored in a cue, you can set how the shape fades in
using the cue’s Mode setting (use [Edit Times] from the main menu
then [Fade Mode]).
Modes 0,1 and 3: The shape size will grow from zero to the
programmed size using the time/delay settings of the cue.
Mode 2: The shape size will be set by the fader position. It will start
at zero and grow to its programmed size when the fader reaches
100%.
If a new cue is fired which controls the same attributes (for example,
a second shape controlling the same fixtures as a currently running
shape), the new shape will crossfade from the running shape.