Runco cx-52hd 用户手册
Runco CX-52HD/CX-57HD Owner’s Operating Manual
21
PRE
L
IMINAR
Y
Connecting External
Speakers (Optional)
Speakers (Optional)
Connect the
(positive) and
(negative) speaker wires to the rear-panel SPEAKER-R
and SPEAKER-L terminals; see Figure 3-8. Maintain the correct polarity. For more
information, refer to the owner’s manual for your speakers.
information, refer to the owner’s manual for your speakers.
Figure 3-8. External Speaker Connection
Connecting to a Dolby
Digital Amplifier
Digital Amplifier
If your home theater has a Dolby Digital amplifier or receiver, connect the digital audio
output from the Crystal Series LCD to the digital audio input of the amplifier/receiver as
shown in Figure 3-9. The Crystal Series LCD supports both coaxial (S/PDIF) and optical
(TosLink) digital audio connections.
output from the Crystal Series LCD to the digital audio input of the amplifier/receiver as
shown in Figure 3-9. The Crystal Series LCD supports both coaxial (S/PDIF) and optical
(TosLink) digital audio connections.
Figure 3-9. Digital Audio Connection
12 mm
Twist exposed
wire strands
together.
wire strands
together.
Right Speaker
Left Speaker
Push tab to the
open position, and
insert the wire.
Then, close tab firmly to
secure the wire in place.
open position, and
insert the wire.
Then, close tab firmly to
secure the wire in place.
The audio output level is fixed. (The volume and mute controls affect
only the speaker and headphone outputs.)
only the speaker and headphone outputs.)
Note
Digital Audio Cable,
Optical
(Sold Separately)
Digital Audio Cable,
Coaxial
(Sold Separately)
Dolby Digital
Amplifier
- or -