Samsung SV-5000W 用户手册
GB
39
GB
38
Using the Assemble Edit Function
This function enables you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your VCR.
2
Press the PLAY button (
) to start playback.
3
When you reach the position from which you wish to start the new
recording, press the P/STILL button ( ).
recording, press the P/STILL button ( ).
4
Press the P/STILL button (
) again as often as necessary to
advance frame by frame, until the exact recording position is
located.
located.
5
While the VCR is in still mode, press the REC button to activate
the Assemble Edit function.
Result:
the Assemble Edit function.
Result:
The Record symbol (
) flashes on the display.
6
Select the source from which you wish to record by pressing:
◆
the CH (
or
) buttons for television channels ; or
◆
the INPUT button for the SC, AV, L I or L2 input sources.
7
Press the P/STILL button ( ) to start recording.
8
When you have finished recording, press STOP (
).
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC
P/STILL
STOP
3
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC
P/STILL
STOP
5
ART INPUT
5
6
8
9
0
CLR/RST
CH
PLAY
0
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC
P/STILL
STOP
2
4
6
6
DISPLAY MONITOR A.DUB
REC
P/STILL
NPUT
SYSTEM
OUTPUT
SYSTEM
SYSTEM
STOP
7
8
The tape counter:
◆ indicates the elapsed time in the play and record modes
(hours, minutes and seconds) ;
◆ is reset when a cassette is inserted in the VCR ; and
◆ enables you to find the beginning of a sequence easily.
◆ enables you to find the beginning of a sequence easily.
☛
To enable the remaining time to be calculated correctly,
you must indicate the type of cassette being used. See
page 23.
you must indicate the type of cassette being used. See
page 23.
1
Insert a cassette in your VCR.
2
Press CLK/COUNT twice.
Result:
Result:
The tape counter is displayed:
0:00:00
.
➢
The tape counter does not necessarily start from zero at the
beginning of the tape.
beginning of the tape.
3
Select the required operation (play, record, fast-forward, rewind).
Result:
Result:
The tape counter indicates how long the cassette has
been running.
been running.
4
To set the tape counter to zero at the beginning of a sequence:
◆
press DISPLAY twice to display the counter ; and
◆
press CLR/RST when you want to set the tape counter to
zero.
zero.
5
To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press REW (
was set to zero, simply press REW (
) or F.F (
).
Result:
The VCR stops automatically when the counter
reaches zero.
reaches zero.
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISPLAY:
◆
once to display the current function, programme
number, recording speed, date, time and counter ;
number, recording speed, date, time and counter ;
◆
twice to display the counter only ;
◆
three times to display the time remaining on the
cassette ; and
cassette ; and
◆
four times to clear the display.
VPS PDC
SLP VCR
SLP VCR
L
AUTO
NTSC4.43
PAL-MN
MESECAM
NTSC4.43
PAL-MN
MESECAM
CONVERSION
STROBE
ART
THROUGH
NTSC4.43
PAL-MN
MESECAM
NTSC4.43
PAL-MN
MESECAM
OUTPUT
INPUT
PB DTR INDEX DUB
SQPB DTR INDEX DUB Hi-F
Hi-Fi
R
+10
+5
0
-10
-20
-30
-40
-20
-30
-40
DEX REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
1
2
3
STROBE AUDIO
Using the Tape Counter
0:00:00
0
CLR/RST
100
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC
P/STILL
STOP
2
4
4